{"product_id":"3kw-off-grid-solar-panel-system-kit","title":"Kit de panneaux solaires hors réseau 24 V 3 kW avec panneaux solaires de 1320 W","description":"\u003ch2\u003e1200W Solar Power with a 3kW Off-Grid Inverter\u003c\/h2\u003e\n\u003cp\u003eBuild a practical solar power system for a cabin, tiny home or selected 120V loads with the \u003cstrong\u003eROCKSOLAR 24V 3kW Off-Grid Solar Kit\u003c\/strong\u003e. The package combines one SRNE HF2430U60-100 pure sine wave inverter, two Philadelphia Solar 600W bifacial panels and one 20-ft 10 AWG PV cable.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA compatible 24V battery is required for the battery-backed system shown and is sold separately.\u003c\/strong\u003e This is an equipment package, not a complete installed system. Battery cables, protection, mounting and other installation materials must be specified for your site.\u003c\/p\u003e\n\u003ch2\u003ePackage Highlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3000W rated inverter output with 120V single-phase pure sine wave AC\u003c\/li\u003e\n\u003cli\u003e2 × 600W panels: 1200W total rated front-side solar capacity\u003c\/li\u003e\n\u003cli\u003e24V nominal battery system; compatible lithium or lead-acid battery settings\u003c\/li\u003e\n\u003cli\u003eBuilt-in MPPT solar charger: up to 60A solar charging\u003c\/li\u003e\n\u003cli\u003eUp to 40A AC charging from a compatible utility or generator supply\u003c\/li\u003e\n\u003cli\u003e6000VA peak inverter rating, not continuous output\u003c\/li\u003e\n\u003cli\u003eTypical 10ms transfer between bypass and inverter operation\u003c\/li\u003e\n\u003cli\u003eOptional Wi-Fi monitoring module, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat Can It Power?\u003c\/h2\u003e\n\u003cp\u003eSuitable loads may include lights, electronics, refrigeration and selected small appliances. Check combined running power and starting surges against both inverter and battery limits. \u003cstrong\u003eThe 3kW rating is inverter capacity, not solar production:\u003c\/strong\u003e the included array is rated at 1.2kW, and actual production varies with sunlight, season, shading and installation.\u003c\/p\u003e\n\u003cp\u003eThis inverter supplies \u003cstrong\u003e120V AC only\u003c\/strong\u003e; the package does not provide 120\/240V split-phase or three-phase output. It is an off-grid inverter, not a grid-export or net-metering system. A compatible AC source can support charging and bypass operation through the specified AC input.\u003c\/p\u003e\n\u003ch2\u003ePhiladelphia Solar 600W Bifacial Panels\u003c\/h2\u003e\n\u003cp\u003eThe included N-type half-cell panels can collect reflected light from the rear when mounting clearance and ground conditions allow. Rear-side gains are installation-dependent and are not included in the 1200W front-side rating. Each panel measures approximately \u003cstrong\u003e2278 × 1134 × 30mm\u003c\/strong\u003e and weighs approximately \u003cstrong\u003e27kg\u003c\/strong\u003e; check available space and mounting loads before choosing an RV or roof installation.\u003c\/p\u003e\n\u003cp\u003eThe panel datasheet specifies a 12-year product warranty and 30-year linear power warranty, subject to manufacturer terms. Confirm the inverter warranty applicable to the supplied unit before purchase.\u003c\/p\u003e\n\u003ch2\u003eBattery and Installation Planning\u003c\/h2\u003e\n\u003cp\u003eChoose a compatible 24V battery with sufficient continuous and surge discharge capability for your loads. Battery capacity determines runtime; voltage alone does not establish suitability. Charging settings must match the battery manufacturer's requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePV layout:\u003c\/strong\u003e the conceptual design uses the two 600W panels in parallel. Do not connect this pair in series without an approved voltage calculation: their combined open-circuit voltage can exceed the inverter's 108V ceiling in cold weather. Final design must check temperature-corrected voltage, bifacial current, connectors, conductor sizing, voltage drop, protection and any required rapid shutdown.\u003c\/p\u003e\n\u003cp\u003eThe SRNE inverter is IP20 and intended for a dry indoor installation with ventilation. Panels can generate in Canadian winter conditions, but snow cover and shorter days reduce production. Protect the battery from temperatures outside its operating and charging limits.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × SRNE HF2430U60-100 3kW off-grid inverter\u003c\/li\u003e\n\u003cli\u003e2 × Philadelphia Solar PS-MNB144(HCBF) 600W bifacial panels\u003c\/li\u003e\n\u003cli\u003e1 × 20-ft 10 AWG PV cable, as listed for the base package\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included unless expressly quoted:\u003c\/strong\u003e battery, Wi-Fi module, generator, mounting\/racking, battery interconnects, PV branch connectors\/combiner, additional wiring, protection\/disconnects, installation, permits and site-specific electrical work. Confirm the written supply scope before ordering. Final installation must follow the equipment manuals and applicable local requirements. Gallery images are illustrative; the connection overview is not installation wiring.\u003c\/p\u003e","brand":"ROCKSOLAR CANADA","offers":[{"title":"Default Title","offer_id":54000170336547,"sku":"","price":1499.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0689\/8856\/7843\/files\/srne-3kw-1200w-solar-kit-gallery-1_4997daf9-54df-4311-a628-08ac6b5e68e9.png?v=1789264491","url":"https:\/\/rocksolar.ca\/fr\/products\/3kw-off-grid-solar-panel-system-kit","provider":"ROCKSOLAR CANADA","version":"1.0","type":"link"}