BC Hydro still pays rebates on home solar and battery storage in 2026, but the rules changed three times this year. The battery rebate is now capped at C$1,500 for most homes, rising to C$5,000 if you enrol the battery in Peak Saver. Since June 1, the installer must be a Home Performance Contractor Network member, and since July 1 new systems connect under BC Hydro's self-generation rate instead of net metering. This guide summarizes the rules in BC Hydro's terms effective October 2, 2026.
2026 rebate amounts at a glance
| Rebate | How it's calculated | Maximum for a single-family home |
|---|---|---|
| Solar panels | C$1,000 per kW of installed DC capacity | C$5,000, and no more than 50% of installed cost |
| Battery, installed with solar | C$500 per kWh of installed storage | C$1,500, and no more than 50% of installed cost |
| Battery, enrolled in Peak Saver | C$500 per kWh of installed storage | C$5,000, and no more than 50% of installed cost |
| Remote microgrid communities | Same per-kW and per-kWh rates | C$10,000 for solar; C$10,000 for a battery installed with solar. Solar is limited to 10 kW per home. |
Commercial buildings, multi-unit buildings, Indigenous governing bodies and social housing providers have higher caps. See BC Hydro's program page for those.
What changed in 2026
- April 1: the residential battery rebate maximum dropped to C$1,500 when paired with solar. The C$5,000 maximum now requires enrolling the battery in Peak Saver within 14 days of going into service.
- June 1: systems must be designed and installed by a member of the Home Performance Contractor Network (HPCN). Self-installs don't qualify.
- July 1: net metering (Rate Schedule 1289) closed to new customers. New solar systems connect under the self-generation rate, Rate Schedule 2289.
Example: one 14.34 kWh home battery
A 14.34 kWh battery works out to C$7,170 at C$500 per kWh, but the cap applies. Installed with solar, the rebate is C$1,500. Enrolled in Peak Saver, it rises to C$5,000, as long as that's no more than half of the installed cost. For most homes, Peak Saver is the difference between a small rebate and a large one.
Battery requirements
To qualify, the battery must:
- Be on BC Hydro's qualified product list for battery storage
- Be certified to cUL 1973 (battery) and cUL 9540 (energy storage system); batteries in a living space must also meet cUL 9540A
- Comply with CSA C22.2 No. 107.1 and CSA C22.3 No. 9
- Be new, purchased in Canada, and at least 5 kWh
- Not replace an existing battery system
- Be installed with solar, unless it's enrolled in Peak Saver
Tesla batteries are excluded from the program. Installations must also meet the 2024 Canadian Electrical Code rules for residential battery systems (Rule 64).
Export rules when you add a battery
Solar-only systems can be set to export surplus power to the grid. If your rebated system includes a battery, BC Hydro's terms require it to be set to non-export, and the battery must charge from solar only, not from the grid. If the battery later fails or isn't maintained, the solar system must stay non-exporting. Ask your contractor how this affects your savings under the self-generation rate before you decide on a battery.
Who qualifies
- BC Hydro or New Westminster Electric Utility residential customers who own the property. FortisBC electric customers aren't eligible for these rebates.
- Single-family homes, duplexes, townhomes, mobile homes on a permanent foundation, and farm properties billed on a residential rate.
- Systems up to 100 kW AC inverter capacity (50 kW AC for New Westminster), connected through a permanent bi-directional meter.
- New Westminster Electric Utility customers can't enrol in Peak Saver, so their battery rebate is capped at C$1,500, and the rebate is paid as a bill credit.
How to apply
- Choose an HPCN contractor and get quotes. BC Hydro recommends at least three.
- Submit a self-generation application before buying equipment. Pre-approval is required, and the installed equipment must match the application.
- Install the system after BC Hydro's technical acceptance, with permits and inspection.
- Submit final documents promptly: the inspection certificate and a paid invoice showing make, model, capacity and cost for each component. The terms allow up to 18 months from technical acceptance to install and submit, but also ask for rebate documents within 6 months of interconnection approval, so don't wait.
- Enrol your battery in Peak Saver within 14 days of going into service if you want the higher battery rebate.
- Get paid by cheque or Interac e-Transfer (New Westminster: bill credit), usually within 60 days after the project passes inspection review.
Choosing equipment
Check a battery against BC Hydro's qualified product list before you buy. If you're comparing batteries for a BC home, contact our team and we'll tell you which products currently qualify and help you size a system. Browse our home energy storage batteries and hybrid solar kits.
Planning a solar project in BC? See how we help BC homeowners choose equipment and prepare their rebate paperwork on our BC solar rebates and installation page.
FAQ
Can I get a battery rebate without solar?
Only if you enrol the battery in BC Hydro's Peak Saver program. Otherwise the battery must be installed with a new or existing solar system.
Can I install the system myself?
No. Since June 1, 2026, a Home Performance Contractor Network member must design and install the system for it to qualify.
Do I still get net metering?
Systems applying after July 1, 2026 connect under the self-generation rate (RS 2289) instead of net metering (RS 1289).
Can I add a battery to my existing solar system?
Yes. Adding a battery or expanding a system qualifies for the added capacity, up to the rebate maximum. The system must then be set to non-export.
Rebate rules change often and funding is first come, first served. This summary reflects BC Hydro's terms effective October 2, 2026. Always confirm current amounts and eligibility on BC Hydro's rebate page before buying.

